Transparent Pricing
Mini Split Installation Cost in Texas
Real installed prices — equipment, labor, line set, and commissioning included. Single-zone systems from $2,000. No hidden fees and no pressure.
- Veteran-Owned & Operated
- TDLR-Licensed Installers (#133305)
- EPA-Certified Installers (#3102/A-720-0010)
- 4.9 / 5 Star Rated Installs
A single-zone mini split costs $2,000–$5,500 installed in Texas, and a whole-home ductless replacement $10,000–$14,500. All figures cover equipment, labor, line set, refrigerant, and commissioning.
What it costs by system type
Start here. These are the budget ranges for a complete installed system, from a single room to a whole-house replacement.
| System type | Typical use case | Estimated installed cost |
|---|---|---|
| Single-Zone (12k BTU) | A hot bonus room over the garage, a home office, or a converted space. | $2,000 – $5,500 |
| Dual-Zone (2 heads) | Cooling a primary suite and a home office on one condenser. | $4,000 – $9,000 |
| Multi-Zone (3–4 heads) | Zoned cooling for an older home with no duct space. | $6,500 – $11,000 |
| Whole-Home Replacement | Replacing central AC entirely for room-by-room control and humidity management. | $10,000 – $14,500 |
What every price includes
- Line set, refrigerant, and condensate drain
- Wall penetration and weather sealing
- Outdoor pad or wall bracket
- System evacuation and vacuum before charging
- Startup, commissioning, and walkthrough
- Permit filing and inspection coordination
- Manufacturer warranty registration
The evacuation step matters more than it sounds. Pulling a proper vacuum removes moisture from the refrigerant lines before charging. Skipping it is invisible on install day and destroys compressors within a few years — it is the most common corner cut on a cheap installation.
Getting comparable quotes
Three quotes only help if they cover the same scope. Ask each contractor to specify:
- · Exact model numbers, indoor and outdoor
- · Whether a load calculation was done, and its result
- · Whether a dedicated circuit is included or excluded
- · Line-set length included, and cost per foot beyond
- · Permit filing — theirs or yours
- · Equipment and labor warranty, stated separately
A quote $800 cheaper because it omits the permit and assumes an existing circuit is not actually cheaper.
What moves your price
Electrical work
A new dedicated 240V circuit moves you up within the range. If your panel is full or you have 100-amp service — common in pre-1970 Texas housing — a subpanel or service upgrade is quoted separately. Have this checked early.
Line-set length
A standard install includes a typical-length line set. A condenser 40 feet from the indoor head costs more in material and, past certain lengths, needs a larger unit to hold capacity.
Mounting type
Wall-mounted heads are standard and cheapest. Floor-mounted units cost modestly more. Ceiling cassettes cost considerably more and need adequate ceiling cavity.
Access difficulty
Second-story installs needing lift equipment, long conduit runs, or attics with no walking room all add labor hours.
Elevated condenser mounting
In flood-prone areas — parts of Houston, Katy, Pearland — mounting the condenser on brackets or a stand adds $150 to $400 and protects the expensive half of the system.
Removing old equipment
Pulling a window unit is free. Removing an evaporative cooler and properly closing and flashing the roof opening runs $300 to $800 — the most underestimated line item in El Paso.
Rebates in 2026
The federal 25C tax credit — up to $2,000 on a qualifying heat pump — expired December 31, 2025 and does not apply to systems installed in 2026. Be skeptical of any contractor still advertising it. Texas utility rebates remain:
| Utility | Coverage | Rebate |
|---|---|---|
| Oncor | DFW, Waco, Tyler, Lubbock | Up to $600 per heat pump |
| CenterPoint | Greater Houston | Up to $500 per heat pump |
| CPS Energy | San Antonio / Bexar County | $100–$275 per ton |
| Austin Energy | City of Austin only | Up to ~$3,000, whole-home |
Austin Energy stops at the Austin city limits — Round Rock, Cedar Park, and Pflugerville are Oncor or cooperative territory. Georgetown, New Braunfels, and Boerne run their own municipal utilities. Check a recent bill. Full detail in therebates guide.
Prices shown are estimates for typical installations and are not a quote. Final pricing depends on a site evaluation. Multi-zone and whole-home figures are estimates; single-zone figures are our published installed pricing.
Pricing Questions
How much does a mini split cost installed in Texas?
What decides where I land inside these ranges?
Is the price different in Dallas versus Houston?
What is not included in these prices?
Are there rebates that reduce these prices?
Do you charge for a quote?
Ready To Get Started?
Free, no-obligation quotes from local professionals.
Get an Exact Quote for Your Home
Fill out the form below and a local pro will reach out shortly.
Mon–Fri 8am–5pm CST · Free, no-obligation quotes · No pressure, no hidden fees